ssh-keygen

SSH-KEYGEN(1)             BSD General Commands Manual            SSH-KEYGEN(1)

NAME
     ssh-keygen — authentication key generation, management and conversion

SYNOPSIS
     ssh-keygen [-q] [-b bits] -t type [-N new_passphrase] [-C comment]
                [-f output_keyfile]
     ssh-keygen -p [-P old_passphrase] [-N new_passphrase] [-f keyfile]
     ssh-keygen -i [-f input_keyfile]
     ssh-keygen -e [-f input_keyfile]
     ssh-keygen -y [-f input_keyfile]
     ssh-keygen -c [-P passphrase] [-C comment] [-f keyfile]
     ssh-keygen -l [-f input_keyfile]
     ssh-keygen -B [-f input_keyfile]
     ssh-keygen -D reader
     ssh-keygen -F hostname [-f known_hosts_file] [-l]
     ssh-keygen -H [-f known_hosts_file]
     ssh-keygen -R hostname [-f known_hosts_file]
     ssh-keygen -U reader [-f input_keyfile]
     ssh-keygen -r hostname [-f input_keyfile] [-g]
     ssh-keygen -G output_file [-v] [-b bits] [-M memory] [-S start_point]
     ssh-keygen -T output_file -f input_file [-v] [-a num_trials]
                [-W generator]

DESCRIPTION
     ssh-keygen generates, manages and converts authentication keys for
     ssh(1).  ssh-keygen can create RSA keys for use by SSH protocol version 1
     and RSA or DSA keys for use by SSH protocol version 2.  The type of key
     to be generated is specified with the -t option.  If invoked without any
     arguments, ssh-keygen will generate an RSA key for use in SSH protocol 2
     connections.

     ssh-keygen is also used to generate groups for use in Diffie-Hellman
     group exchange (DH-GEX).  See the MODULI GENERATION section for details.

     Normally each user wishing to use SSH with RSA or DSA authentication runs
     this once to create the authentication key in ~/.ssh/identity,
     ~/.ssh/id_dsa or ~/.ssh/id_rsa.  Additionally, the system administrator
     may use this to generate host keys.

     Normally this program generates the key and asks for a file in which to
     store the private key.  The public key is stored in a file with the same
     name but “.pub” appended.  The program also asks for a passphrase.  The
     passphrase may be empty to indicate no passphrase (host keys must have an
     empty passphrase), or it may be a string of arbitrary length.  A
     passphrase is similar to a password, except it can be a phrase with a
     series of words, punctuation, numbers, whitespace, or any string of char‐
     acters you want.  Good passphrases are 10-30 characters long, are not
     simple sentences or otherwise easily guessable (English prose has only
     1-2 bits of entropy per character, and provides very bad passphrases),
     and contain a mix of upper and lowercase letters, numbers, and non-
     alphanumeric characters.  The passphrase can be changed later by using
     the -p option.

     There is no way to recover a lost passphrase.  If the passphrase is lost
     or forgotten, a new key must be generated and copied to the corresponding
     public key to other machines.

     For RSA1 keys, there is also a comment field in the key file that is only
     for convenience to the user to help identify the key.  The comment can
     tell what the key is for, or whatever is useful.  The comment is initial‐
     ized to “user@host” when the key is created, but can be changed using the
     -c option.

     After a key is generated, instructions below detail where the keys should
     be placed to be activated.

     The options are as follows:

     -a trials
             Specifies the number of primality tests to perform when screening
             DH-GEX candidates using the -T command.

     -B      Show the bubblebabble digest of specified private or public key
             file.

     -b bits
             Specifies the number of bits in the key to create.  For RSA keys,
             the minimum size is 768 bits and the default is 2048 bits.  Gen‐
             erally, 2048 bits is considered sufficient.  DSA keys must be
             exactly 1024 bits as specified by FIPS 186-2.

     -C comment
             Provides a new comment.

     -c      Requests changing the comment in the private and public key
             files.  This operation is only supported for RSA1 keys.  The pro‐
             gram will prompt for the file containing the private keys, for
             the passphrase if the key has one, and for the new comment.

     -D reader
             Download the RSA public key stored in the smartcard in reader.

     -e      This option will read a private or public OpenSSH key file and
             print the key in RFC 4716 SSH Public Key File Format to stdout.
             This option allows exporting keys for use by several commercial
             SSH implementations.

     -F hostname
             Search for the specified hostname in a known_hosts file, listing
             any occurrences found.  This option is useful to find hashed host
             names or addresses and may also be used in conjunction with the
             -H option to print found keys in a hashed format.

     -f filename
             Specifies the filename of the key file.

     -G output_file
             Generate candidate primes for DH-GEX.  These primes must be
             screened for safety (using the -T option) before use.

     -g      Use generic DNS format when printing fingerprint resource records
             using the -r command.

     -H      Hash a known_hosts file.  This replaces all hostnames and
             addresses with hashed representations within the specified file;
             the original content is moved to a file with a .old suffix.
             These hashes may be used normally by ssh and sshd, but they do
             not reveal identifying information should the file's contents be
             disclosed.  This option will not modify existing hashed hostnames
             and is therefore safe to use on files that mix hashed and non-
             hashed names.

     -i      This option will read an unencrypted private (or public) key file
             in SSH2-compatible format and print an OpenSSH compatible private
             (or public) key to stdout.  ssh-keygen also reads the RFC 4716
             SSH Public Key File Format.  This option allows importing keys
             from several commercial SSH implementations.

     -l      Show fingerprint of specified public key file.  Private RSA1 keys
             are also supported.  For RSA and DSA keys ssh-keygen tries to
             find the matching public key file and prints its fingerprint.  If
             combined with -v, an ASCII art representation of the key is sup‐
             plied with the fingerprint.

     -M memory
             Specify the amount of memory to use (in megabytes) when generat‐
             ing candidate moduli for DH-GEX.

     -N new_passphrase
             Provides the new passphrase.

     -P passphrase
             Provides the (old) passphrase.

     -p      Requests changing the passphrase of a private key file instead of
             creating a new private key.  The program will prompt for the file
             containing the private key, for the old passphrase, and twice for
             the new passphrase.

     -q      Silence ssh-keygen.  Used by system administration scripts when
             creating a new key.

     -R hostname
             Removes all keys belonging to hostname from a known_hosts file.
             This option is useful to delete hashed hosts (see the -H option
             above).

     -r hostname
             Print the SSHFP fingerprint resource record named hostname for
             the specified public key file.

     -S start
             Specify start point (in hex) when generating candidate moduli for
             DH-GEX.

     -T output_file
             Test DH group exchange candidate primes (generated using the -G
             option) for safety.

     -t type
             Specifies the type of key to create.  The possible values are
             “rsa1” for protocol version 1 and “rsa” or “dsa” for protocol
             version 2.

     -U reader
             Upload an existing RSA private key into the smartcard in reader.

     -v      Verbose mode.  Causes ssh-keygen to print debugging messages
             about its progress.  This is helpful for debugging moduli genera‐
             tion.  Multiple -v options increase the verbosity.  The maximum
             is 3.

     -W generator
             Specify desired generator when testing candidate moduli for DH-
             GEX.

     -y      This option will read a private OpenSSH format file and print an
             OpenSSH public key to stdout.

MODULI GENERATION
     ssh-keygen may be used to generate groups for the Diffie-Hellman Group
     Exchange (DH-GEX) protocol.  Generating these groups is a two-step
     process: first, candidate primes are generated using a fast, but memory
     intensive process.  These candidate primes are then tested for suitabil‐
     ity (a CPU-intensive process).

     Generation of primes is performed using the -G option.  The desired
     length of the primes may be specified by the -b option.  For example:

           # ssh-keygen -G moduli-2048.candidates -b 2048

     By default, the search for primes begins at a random point in the desired
     length range.  This may be overridden using the -S option, which speci‐
     fies a different start point (in hex).

     Once a set of candidates have been generated, they must be tested for
     suitability.  This may be performed using the -T option.  In this mode
     ssh-keygen will read candidates from standard input (or a file specified
     using the -f option).  For example:

           # ssh-keygen -T moduli-2048 -f moduli-2048.candidates

     By default, each candidate will be subjected to 100 primality tests.
     This may be overridden using the -a option.  The DH generator value will
     be chosen automatically for the prime under consideration.  If a specific
     generator is desired, it may be requested using the -W option.  Valid
     generator values are 2, 3, and 5.

     Screened DH groups may be installed in /etc/ssh/moduli.  It is important
     that this file contains moduli of a range of bit lengths and that both
     ends of a connection share common moduli.

FILES
     ~/.ssh/identity
             Contains the protocol version 1 RSA authentication identity of
             the user.  This file should not be readable by anyone but the
             user.  It is possible to specify a passphrase when generating the
             key; that passphrase will be used to encrypt the private part of
             this file using 3DES.  This file is not automatically accessed by
             ssh-keygen but it is offered as the default file for the private
             key.  ssh(1) will read this file when a login attempt is made.

     ~/.ssh/identity.pub
             Contains the protocol version 1 RSA public key for authentica‐
             tion.  The contents of this file should be added to
             ~/.ssh/authorized_keys on all machines where the user wishes to
             log in using RSA authentication.  There is no need to keep the
             contents of this file secret.

     ~/.ssh/id_dsa
             Contains the protocol version 2 DSA authentication identity of
             the user.  This file should not be readable by anyone but the
             user.  It is possible to specify a passphrase when generating the
             key; that passphrase will be used to encrypt the private part of
             this file using 3DES.  This file is not automatically accessed by
             ssh-keygen but it is offered as the default file for the private
             key.  ssh(1) will read this file when a login attempt is made.

     ~/.ssh/id_dsa.pub
             Contains the protocol version 2 DSA public key for authentica‐
             tion.  The contents of this file should be added to
             ~/.ssh/authorized_keys on all machines where the user wishes to
             log in using public key authentication.  There is no need to keep
             the contents of this file secret.

     ~/.ssh/id_rsa
             Contains the protocol version 2 RSA authentication identity of
             the user.  This file should not be readable by anyone but the
             user.  It is possible to specify a passphrase when generating the
             key; that passphrase will be used to encrypt the private part of
             this file using 3DES.  This file is not automatically accessed by
             ssh-keygen but it is offered as the default file for the private
             key.  ssh(1) will read this file when a login attempt is made.

     ~/.ssh/id_rsa.pub
             Contains the protocol version 2 RSA public key for authentica‐
             tion.  The contents of this file should be added to
             ~/.ssh/authorized_keys on all machines where the user wishes to
             log in using public key authentication.  There is no need to keep
             the contents of this file secret.

     /etc/ssh/moduli
             Contains Diffie-Hellman groups used for DH-GEX.  The file format
             is described in moduli(5).

SEE ALSO
     ssh(1), ssh-add(1), ssh-agent(1), ssh-vulnkey(1), moduli(5), sshd(8)

     The Secure Shell (SSH) Public Key File Format, RFC 4716, 2006.

AUTHORS
     OpenSSH is a derivative of the original and free ssh 1.2.12 release by
     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
     de Raadt and Dug Song removed many bugs, re-added newer features and cre‐
     ated OpenSSH.  Markus Friedl contributed the support for SSH protocol
     versions 1.5 and 2.0.

BSD                            December 10, 2010                           BSD