git-add

GIT-ADD(1)                        Git Manual                        GIT-ADD(1)



NAME
       git-add - Add file contents to the index

SYNOPSIS
       git add [-n] [-v] [--force | -f] [--interactive | -i] [--patch | -p]
                 [--edit | -e] [--all | [--update | -u]] [--intent-to-add | -N]
                 [--refresh] [--ignore-errors] [--] [...]


DESCRIPTION
       This command updates the index using the current content found in the
       working tree, to prepare the content staged for the next commit. It
       typically adds the current content of existing paths as a whole, but
       with some options it can also be used to add content with only part of
       the changes made to the working tree files applied, or remove paths
       that do not exist in the working tree anymore.

       The "index" holds a snapshot of the content of the working tree, and it
       is this snapshot that is taken as the contents of the next commit. Thus
       after making any changes to the working directory, and before running
       the commit command, you must use the add command to add any new or
       modified files to the index.

       This command can be performed multiple times before a commit. It only
       adds the content of the specified file(s) at the time the add command
       is run; if you want subsequent changes included in the next commit,
       then you must run git add again to add the new content to the index.

       The git status command can be used to obtain a summary of which files
       have changes that are staged for the next commit.

       The git add command will not add ignored files by default. If any
       ignored files were explicitly specified on the command line, git add
       will fail with a list of ignored files. Ignored files reached by
       directory recursion or filename globbing performed by Git (quote your
       globs before the shell) will be silently ignored. The git add command
       can be used to add ignored files with the -f (force) option.

       Please see git-commit(1) for alternative ways to add content to a
       commit.

OPTIONS
       ...
           Files to add content from. Fileglobs (e.g.  *.c) can be given to
           add all matching files. Also a leading directory name (e.g.  dir to
           add dir/file1 and dir/file2) can be given to add all files in the
           directory, recursively.

       -n, --dry-run
           Don’t actually add the file(s), just show if they exist.

       -v, --verbose
           Be verbose.

       -f, --force
           Allow adding otherwise ignored files.

       -i, --interactive
           Add modified contents in the working tree interactively to the
           index. Optional path arguments may be supplied to limit operation
           to a subset of the working tree. See “Interactive mode” for
           details.

       -p, --patch
           Interactively choose hunks of patch between the index and the work
           tree and add them to the index. This gives the user a chance to
           review the difference before adding modified contents to the index.

           This effectively runs add --interactive, but bypasses the initial
           command menu and directly jumps to the patch subcommand. See
           “Interactive mode” for details.

       -e, --edit
           Open the diff vs. the index in an editor and let the user edit it.
           After the editor was closed, adjust the hunk headers and apply the
           patch to the index.

           NOTE: Obviously, if you change anything else than the first
           character on lines beginning with a space or a minus, the patch
           will no longer apply.

       -u, --update
           Only match  against already tracked files in the index
           rather than the working tree. That means that it will never stage
           new files, but that it will stage modified new contents of tracked
           files and that it will remove files from the index if the
           corresponding files in the working tree have been removed.

           If no  is given, default to "."; in other words,
           update all tracked files in the current directory and its
           subdirectories.

       -A, --all
           Like -u, but match  against files in the working tree
           in addition to the index. That means that it will find new files as
           well as staging modified content and removing files that are no
           longer in the working tree.

       -N, --intent-to-add
           Record only the fact that the path will be added later. An entry
           for the path is placed in the index with no content. This is useful
           for, among other things, showing the unstaged content of such files
           with git diff and committing them with git commit -a.

       --refresh
           Don’t add the file(s), but only refresh their stat() information in
           the index.

       --ignore-errors
           If some files could not be added because of errors indexing them,
           do not abort the operation, but continue adding the others. The
           command shall still exit with non-zero status.

       --
           This option can be used to separate command-line options from the
           list of files, (useful when filenames might be mistaken for
           command-line options).

CONFIGURATION
       The optional configuration variable core.excludesfile indicates a path
       to a file containing patterns of file names to exclude from git-add,
       similar to $GIT_DIR/info/exclude. Patterns in the exclude file are used
       in addition to those in info/exclude. See gitrepository-layout(5).

EXAMPLES
       ·   Adds content from all \*.txt files under Documentation directory
           and its subdirectories:

               $ git add Documentation/\*.txt

           Note that the asterisk \* is quoted from the shell in this example;
           this lets the command include the files from subdirectories of
           Documentation/ directory.

       ·   Considers adding content from all git-*.sh scripts:

               $ git add git-*.sh

           Because this example lets the shell expand the asterisk (i.e. you
           are listing the files explicitly), it does not consider
           subdir/git-foo.sh.

INTERACTIVE MODE
       When the command enters the interactive mode, it shows the output of
       the status subcommand, and then goes into its interactive command loop.

       The command loop shows the list of subcommands available, and gives a
       prompt "What now> ". In general, when the prompt ends with a single >,
       you can pick only one of the choices given and type return, like this:

               *** Commands ***
                 1: status       2: update       3: revert       4: add untracked
                 5: patch        6: diff         7: quit         8: help
               What now> 1


       You also could say s or sta or status above as long as the choice is
       unique.

       The main command loop has 6 subcommands (plus help and quit).

       status
           This shows the change between HEAD and index (i.e. what will be
           committed if you say git commit), and between index and working
           tree files (i.e. what you could stage further before git commit
           using git add) for each path. A sample output looks like this:

                             staged     unstaged path
                    1:       binary      nothing foo.png
                    2:     +403/-35        +1/-1 git-add--interactive.perl

           It shows that foo.png has differences from HEAD (but that is binary
           so line count cannot be shown) and there is no difference between
           indexed copy and the working tree version (if the working tree
           version were also different, binary would have been shown in place
           of nothing). The other file, git-add—interactive.perl, has 403
           lines added and 35 lines deleted if you commit what is in the
           index, but working tree file has further modifications (one
           addition and one deletion).

       update
           This shows the status information and issues an "Update>>" prompt.
           When the prompt ends with double >>, you can make more than one
           selection, concatenated with whitespace or comma. Also you can say
           ranges. E.g. "2-5 7,9" to choose 2,3,4,5,7,9 from the list. If the
           second number in a range is omitted, all remaining patches are
           taken. E.g. "7-" to choose 7,8,9 from the list. You can say * to
           choose everything.

           What you chose are then highlighted with *, like this:

                          staged     unstaged path
                 1:       binary      nothing foo.png
               * 2:     +403/-35        +1/-1 git-add--interactive.perl

           To remove selection, prefix the input with - like this:

               Update>> -2

           After making the selection, answer with an empty line to stage the
           contents of working tree files for selected paths in the index.

       revert
           This has a very similar UI to update, and the staged information
           for selected paths are reverted to that of the HEAD version.
           Reverting new paths makes them untracked.

       add untracked
           This has a very similar UI to update and revert, and lets you add
           untracked paths to the index.

       patch
           This lets you choose one path out of a status like selection. After
           choosing the path, it presents the diff between the index and the
           working tree file and asks you if you want to stage the change of
           each hunk. You can say:

               y - stage this hunk
               n - do not stage this hunk
               q - quit, do not stage this hunk nor any of the remaining ones
               a - stage this and all the remaining hunks in the file
               d - do not stage this hunk nor any of the remaining hunks in the file
               g - select a hunk to go to
               / - search for a hunk matching the given regex
               j - leave this hunk undecided, see next undecided hunk
               J - leave this hunk undecided, see next hunk
               k - leave this hunk undecided, see previous undecided hunk
               K - leave this hunk undecided, see previous hunk
               s - split the current hunk into smaller hunks
               e - manually edit the current hunk
               ? - print help

           After deciding the fate for all hunks, if there is any hunk that
           was chosen, the index is updated with the selected hunks.

       diff
           This lets you review what will be committed (i.e. between HEAD and
           index).

SEE ALSO
       git-status(1) git-rm(1) git-reset(1) git-mv(1) git-commit(1) git-
       update-index(1)

AUTHOR
       Written by Linus Torvalds 

DOCUMENTATION
       Documentation by Junio C Hamano and the git-list
       .

GIT
       Part of the git(1) suite

NOTES
        1. torvalds@osdl.org
           mailto:torvalds@osdl.org

        2. git@vger.kernel.org
           mailto:git@vger.kernel.org



Git 1.7.0.4                       12/03/2010                        GIT-ADD(1)